| Work piece: | ||
|---|---|---|
| Height max | mm | 200 |
| Width max | mm | 320 |
| Horizontal mill aggregate | ||
| Mill diameter | mm | 180 |
| Mill width | mm | 130 |
| 2 Motors | kW | @2.2 |
| Vertical mill aggregate | ||
| Mill diameter | mm | 230 |
| Mill width max | mm | 120 |
| 2 Motors | kW | @2.2 |
| Drill aggregate | ||
| Bit fastening device | Clamping system ER 25 | |
| Shaft size, max | mm | 16 |
| Drill bit size, max | mm | 32 |
| Motor | kW | 1.8 |
| Saw aggregate | ||
| Saw blade diameter | mm | 600 |
| Motor | kW | 7.5 |
| Chain mill | ||
| Mortise bar, length | mm | 300 |
| Motor | kW | 1.8 |
| 5-spindle mill aggregate | ||
| dovetail mill | mm, angle | 50, 15° |
| drill/mill head | mm | 40 |
| drill/mill head | mm | 24 |
| mill/head or drill | mm | variable |
| drill/mill head | mm | 20 |
| Motor | kW | 5.5 |
| Pneumatics | ||
| Site pressure min/max | bar | 7-10 |
| Air consumption | Nm³/h | 8 |
| Electrical power | ||
| Voltage | V, Hz | 400/50Hz |
| No load | kW | 8.8-15.8 |
| Fusing | A | 3 x 25 slow |
| Maximum power draw at any one time | kW | 7.5 |
| Work Piece Feed system | qty | 4 x cogged belt |
| Marking system | qty | 1 |
About the Krusimatic G2 | krusi.com home
